• Abstract

    The manufacturing landscape has been altered by additive manufacturing (AdMa), which has surfaced as a versatile and adaptive technology. Notable advancements have been made in the creation of ceramic substances for AdMa procedures. The ceramic components made using AdMa processes show deficiencies concerning their overall performance and mechanical properties. More recently, research has concentrated on improving mechanical properties and effectiveness by optimizing the fabrication procedure by integrating additional post-processing methods and using a material pre-treatment approach. The advancements in AdMa methods for producing high-performance ceramic (H-Perform-C) materials, referred to as advanced ceramics, are reviewed and examined in this article. AdMa methods are classified based on the ASTM's standards and the particular technology used in these procedures is further explained. A comprehensive review is provided, explaining the fundamental principles, mechanical characteristics, merits, drawbacks, practical implementations and constraints associated with each respective technological approach.

  • References

    1. Ahn DGDG (2021) Directed energy deposition (DED) process: State of the art. International Journal of Precision Engineering and Manufacturing-Green Technology, 8, 703-742. DOI: 10.1007/S40684-020-00302-7
    2. Al Rashid A, Ahmed W, Khalid MY & Koc M, (2021) Vat photopolymerization of polymers and polymer composites: Processes and applications. Additive Manufacturing, 47, 102279. DOI: 10.1016/j.addma.2021.102279
    3. Balbaa MA, Ghasemi A, Fereiduni E, Elbestawi MA, Jadhav SD & Kruth JP, (2021) Role of powder particle size on laser powder bed fusion processability of AlSi10mg alloy. Additive manufacturing, 37, 101630. DOI: 10.1016/j.addma.2020.101630
    4. Bergler M, Korostoff J, Torrecillas-Martinez L & Mante FK (2022) Ceramic Printing--Comparative Study of the Flexural Strength of 3D-Printed and Milled Zirconia. International Journal of Prosthodontics, 35(6).
    5. Bhatt PM, Kabir AM, Peralta M, Bruck HA & Gupta SK (2019) A robotic cell for performing sheet lamination-based additive manufacturing. Additive Manufacturing, 27, 278-289. DOI: 10.1016/j.addma.2019.02.002
    6. Chen Q, (2022) Ceramic powder-based hybrid binder jetting system (Doctoral dissertation, UniversitéPolytechniqueHauts-de-France; Institut national des sciences appliquéesHauts-de-France).
    7. Daminabo SC, Goel S, Grammatikos SA, Nezhad HY & Thakur VK, (2020) Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Materials today chemistry, 16, 100248. DOI: 10.1016/j.mtchem.2020.100248
    8. Daminabo SC, Goel S, Grammatikos SA, Nezhad HY & Thakur VK, (2020) Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Materials today chemistry, 16, 100248. DOI: 10.1016/j.mtchem.2020.100248
    9. Dehurtevent M, Robberecht L, Hornez JC, Thuault A, Deveaux E & Béhin P, (2017) Stereolithography: A new method for processing dental ceramics by additive computer-aided manufacturing. Dental materials, 33(5), 477-485. DOI: 10.1016/j.dental.2017.01.018
    10. Dilag J, Chen T, Li S & Bateman SA, (2019) Design and direct additive manufacturing of three-dimensional surface micro-structures using material jetting technologies. Additive Manufacturing, 27, 167-174. DOI: 10.1016/j.addma.2019.01.009
    11. Gaudillière N, Duballet R, Bouyssou C, Mallet A, Roux P, Zakeri M & Dirrenberger J, (2019) Building applications using lost formworks obtained through large-scale additive manufacturing of ultra-high-performance concrete. In 3D concrete printing technology, 37-58. Butterworth-Heinemann. DOI: 10.1007/978-3-319-92294-2_35
    12. Gibson I, Rosen D, Stucker B, Khorasani M, Gibson I, Rosen D, Stucker B & Khorasani M, (2021) Powder bed fusion. Additive manufacturing technologies, 125-170. DOI: 10.1007/978-3-030-56127-7_5
    13. Gilani N, Foerster A & Aboulkhair NT, (2023) Material Jetting. In Springer Handbook of Additive Manufacturing, 371-387. Cham: Springer International Publishing. DOI: 10.1007/978-3-031-20752-5_23
    14. Jang S, Park S & Bae CJ, (2020) Development of ceramic additive manufacturing: process and materials technology. Biomedical Engineering Letters, 10, 493-503. DOI: 10.1007/s13534-020-00175-4
    15. Jiménez M, Romero L, Domínguez IA, Espinosa MDM & Domínguez M, (2019) Additive manufacturing technologies: an overview about 3D printing methods and future prospects. Complexity. DOI: 10.1155/2019/9656938
    16. Kang SH, Kim S, Sohn DK & Ko HS, (2020) Analysis of drop-on-demand piezo inkjet performance. Physics of Fluids, 32(2). DOI: 10.1063/1.5142023
    17. Krinitcyn M, Fu Z, Harris J, Kostikov K, Pribytkov GA, Greil P & Travitzky N, (2017) Laminated Object Manufacturing of in-situ synthesized MAX-phase composites. Ceramics international, 43(12), 9241-9245. DOI: 10.1016/j.ceramint.2017.04.079
    18. Kumar S & Kumar S, (2020) Laser powder bed fusion. Additive manufacturing processes, 41-63. DOI: 10.1007/978-3-030-45089-2_3
    19. Lakhdar Y, Tuck C, Binner J, Terry A & Goodridge R, (2021) Additive manufacturing of advanced ceramic materials. Progress in Materials Science, 116, 100736. DOI: 10.1016/j.pmatsci.2020.100736
    20. LaleganiDezaki M, MohdAriffin MKA & Hatami S, (2021) An overview of fused deposition modeling (FDM): Research, development and process optimization. Rapid Prototyping Journal, 27(3), 562-582. DOI: 10.1108/RPJ-08-2019-0230
    21. Liu H, Su H, Shen Z, Zhao, D, Liu Y, Guo Y, Guo H, Guo M, Xie K, Zhang J & Liu L, (2021) One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition. Journal of the European Ceramic Society, 41(6), 3547-3558. DOI: 10.1016/j.jeurceramsoc.2021.01.047
    22. Liu Y & Derby B, (2019) Experimental study of the parameters for stable drop-on-demand inkjet performance. Physics of Fluids, 31(3). DOI: 10.1063/1.5085868
    23. Ma Y, Xie X, Yang W, Yu Z, Sun X, Zhang Y, Yang X, Kimura H, Hou C, Guo Z, & Du W, (2021) Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors. Advanced Composites and Hybrid Materials, 1-19. DOI: 10.1007/s42114-021-00358-2
    24. Mackay ME, (2018) The importance of rheological behavior in the additive manufacturing technique material extrusion. Journal of Rheology, 62(6), 1549-1561. DOI: 10.1122/1.5037687
    25. Meenakshisundaram V, (2021) Investigating the Process-Structure-Property Relationships in Vat Photopolymerization to Enable Fabrication of Performance Polymers (Doctoral dissertation, Virginia Tech).
    26. Miyanaji H, (2018) Binder jetting additive manufacturing process fundamentals and the resultant influences on part quality.
    27. Narei H, Fatehifar M, Malt AH, Bissell J, Souri M, Nasr Esfahani M & Jabbari, M, (2021) Numerical simulation of a core–shell polymer strand in material extrusion additive manufacturing. Polymers, 13(3), 476. DOI: 10.3390/polym13030476
    28. Nawrot W & Malecha K, (2020) Additive manufacturing revolution in ceramic microsystems. Microelectronics International, 37(2), 79-85. DOI: 10.1108/MI-11-2019-0073
    29. Pelanconi M, Rezaei E & Ortona A, (2020) Cellular ceramic architectures produced by hybrid additive manufacturing: A review on the evolution of their design. Journal of the Ceramic Society of Japan, 128(9), 595-604. DOI: 10.2109/jcersj2.20071
    30. Pelz JS, Ku N, Meyers MA & Vargas-Gonzalez LR, (2021) Additive manufacturing of structural ceramics: a historical perspective. journal of materials research and technology, 15, 670-695. DOI: 10.1016/j.jmrt.2021.07.155
    31. Peng F, Vogt BD & Cakmak M, (2018) Complex flow and temperature history during melt extrusion in material extrusion additive manufacturing. Additive Manufacturing, 22, 197-206. DOI: 10.1016/j.addma.2018.05.015
    32. Pfeiffer S, Florio K, Puccio D, Grasso M, Colosimo BM, Aneziris CG, Wegener K & Graule T, (2021) Direct laser additive manufacturing of high performance oxide ceramics: A state-of-the-art review. Journal of the European Ceramic Society, 41(13), 6087-6114. DOI: 10.1016/j.jeurceramsoc.2021.05.035
    33. Rane, K, Petro S & Strano M, (2020) Evolution of porosity and geometrical quality through the ceramic extrusion additive manufacturing process stages. Additive Manufacturing, 32, 101038. DOI: 10.1016/j.addma.2020.101038
    34. Raval P, Patel D, Prajapati R, Badheka V, Gupta MK & Khanna N, (2022) Energy consumption and economic modelling of performance measures in machining of wire arc additively manufactured Inconel-625. Sustainable Materials and Technologies, 32, 00434. DOI: 10.1016/j.susmat.2022.e00434
    35. Scheithauer U, Schwarzer E, Moritz T, & Michaelis A, (2018) Additive manufacturing of ceramic heat exchanger: opportunities and limits of the lithography-based ceramic manufacturing (LCM). Journal of Materials Engineering and Performance, 27, 14-20. DOI: 10.1007/s11665-017-2843-z
    36. Shen X & Naguib HE, (2019) A robust ink deposition system for binder jetting and material jetting. Additive Manufacturing, 29, 100820. DOI: 10.1016/j.addma.2019.100820
    37. Sohail MG, Kahraman R, Al Nuaimi N, Gencturk B & Alnahhal W, (2021) Durability characteristics of high and ultra-high performance concretes. Journal of Building Engineering, 33, 101669. DOI: 10.1016/j.jobe.2021.103264
    38. Speidel A, Gargalis L, Ye J, Matthews MJ, Spierings A, Hague R, Clare AT & Murray JW, (2022) Chemical recovery of spent copper powder in laser powder bed fusion. Additive Manufacturing, 52, 102711. DOI: 10.1016/j.addma.2022.102711
    39. Svetlizky D, Das M, Zheng B, Vyatskikh AL, Bose S, Bandyopadhyay A, Schoenung JM, Lavernia EJ & Eliaz N, (2021) Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications. Materials Today, 49, 271-295. DOI: 10.1016/j.mattod.2021.03.020
    40. Terrazas-Nájera CA, Romero A, Felice R & Wicker R, (2023) Multi-wavelength pyrometry as an in situ diagnostic tool in metal additive manufacturing: Detecting sintering and liquid phase transitions in electron beam powder bed fusion. Additive Manufacturing, 63, 103404. DOI: 10.1016/j.addma.2023.103404
    41. Tischer F, Cholewa S, Düsenberg B, Drummer D, Peukert W & Schmidt J, (2023) Polyamide 11 nanocompositefeedstocks for powder bed fusion via liquid-liquid phase separation and crystallization. Powder Technology, 424, 118563. DOI: 10.1016/j.powtec.2023.118563
    42. Wang JC & Dommati H, (2018) Fabrication of zirconia ceramic parts by using solvent-based slurry stereolithography and sintering. The International Journal of Advanced Manufacturing Technology, 98, 1537-1546. DOI: 10.1007/s00170-018-2349-3
    43. Westbeek S, van Dommelen JAW, Remmers JJC & Geers MG, (2019) Influence of particle shape in the additive manufacturing process for ceramics. Computers & Mathematics with Applications, 78(7), 2360-2376. DOI: 10.1016/j.camwa.2018.08.033
    44. Wolf A, Rosendahl PL & Knaack U, (2022) Additive manufacturing of clay and ceramic building components. Automation in Construction, 133, 103956. DOI: 10.1016/j.autcon.2021.103956
    45. Zhao D, Zhou H, Wang Y, Yin J & Huang Y, (2021) Drop-on-demand (DOD) inkjet dynamics of printing viscoelastic conductive ink. Additive Manufacturing, 48, 102451. DOI: 10.1016/j.addma.2021.102451

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright (c) 2023 Malque Publishing

How to cite

Mishra, R., Rajiv, A., Chaudhary, P., & Sharma, B. (2024). Evolution of ceramic additive manufacturing: A comprehensive survey for high-performance and dental applications. Multidisciplinary Reviews, 6, 2023ss054. https://doi.org/10.31893/multirev.2023ss054
  • Article viewed - 15
  • PDF downloaded - 6